1. Cutting range: Ø0~Ø36mm
2. Cutting speed:1-2sec/tube
3. Blade return speed: 0.5sec/Time
4. Continuously cutting ability: 600 Times
5. Continuously working duration: 180min
6.Working voltage: DC21V
7. Recharge duration: 2hour
8. Battery life: 500 times recharge
9. Electromotor life:Continuously working 800hours
10.Size: 306x120x75mm
11. Net weight: 1.075 kg
Function
1. Auto cutter is a kind of electromotor driven hand-hold pvc pipe cutting tool.
2. It is suit for cutting Ø0-Ø36mm PVC PIPE.
3. It is blade fast reset function, returnning the blade to the default position within 0.5 second
4. The cutting action will stop automaticly when the pvc pipe is cut
5. Easy to operate, fast to cut, save energy, improve the working efficiency
6. Rechargeable battery applied saving the cost. Good to the environment.
7.Outlooking patent:
Operation steps
1. Insert the battery pack into the interface of the electric tube cutter battery pack.
2. Turn on the power control switch, the working indicator light is green.
3. Press the power control switch for the first time, continuously pull the trigger twice and enter the blade open state.
4. Normal shear: press the trigger blade to close, release the trigger blade to open. Blade closure: press the trigger for more than 5 seconds and hear the sound of "d, ddd" the trigger blade is closed.
5. After the equipment enters the operating state, adjust the blade size according to the shear requirements: continuously press the trigger for 2 seconds, after hear the one sound of "d" and then release the trigger.
6. Without any operation within one minute during the working state, the equipment will automatically stop and disconnect the trigger function, and the trigger shall be pulled continuously twice to enter the working state.
