High quality blade : GIANTOP uses high grade carbon steel that ensures consistent and uniformed blade thickness and hardness by our own developed cold rolling process and heat treatment techniques to provide durability that resists kinking/bending while using.
Accuracy: GIANTOP's advanced technology provides both the tolerance of EC Class I and EC class II. The tolerance has been determined at 20˚C. The tolerance of Class I and Class II are determined by the formula (a+bxL) * a, b=coefficients fixed * L=length in meter
1. Designed with easy-to-read numbers on both sides of the blade.
2. Easy vertical reading on ceiling
3. Back side printing for precision marking and line drawing
4. Back scale reading makes measurement easier while using the tape against wall
and ceiling, featured magnetic tip enhances convenience
5. Zero falls in the same place on each side of the blade.
GIANTOP offers a complete tape measure line with magnetic tips. Invented to allow easy one-person measurements. Magnetic tapes are the ideal measuring tool for Electricians, Plumbers, Drywallers, Framers, Welders, HVAC (heating, ventilation and air conditioning) installers, Steam Fitters, and anyone working with ferrous metals.
The powerful magnetic tip That holds tape measure firmly in place on iron and steel surfaces.
The magnet strength is enough to keep the end hook while positioned either horizontally or hanging vertically.
*Note :
Magnetic strength will vary with different types of metal surfaces
Zero commencement of the magnetic tip
1. The tape still achieves accurate inside and outside measurements.
2. When hanging and pulling magnet, deduct 2 mm from measurement.
QUALITY STANDARD: Tolerance of the value indication from the zero piont to any graduation line must accord with the following rule:
Grade I = (0.1+0.1.L)mm
Grade II = (0.3+0.2.L)mm
